Institute of Molecular Sciences

Funder

Organizational Unit

Publications

On capillary viscosity measurements: how far do surface tension effects go?

Publication . Sequeira, Maria Carolina; Caetano, Fernando J. P.; Diogo, Herminio; Fareleira, João M. N. A.; Santos, Fernando J. V.; Serro, A. P.

Viscosity is a fundamental thermophysical property of liquids making it very important particularly in the industry. Capillary viscometers have been widely used for viscosity measurements in different applications, the most relevant being the definition of viscosity standards, traceable to the primary water viscosity standard, by metrological institutions and industrial applications, mostly for quality control. Practical viscometry is based on the internationally accepted primary standard value for the kinematic viscosity of water at 20ºC and atmospheric pressure, which has been measured using capillary viscometers [1]. However, due to the water surface tension, viscosity measurements which have been related to water as a primary standard, can be significantly affected. It is difficult to rigorously assess the surface tension effects on capillary viscometers, and the practical way to avoid this problem is to use long capillaries, which are not appropriate for routine measurements [1-3]. After several experimental studies, using different types of viscometers, the usual procedure to correct surface tension effects in capillary viscosity measurements adopted by different authors, is to employ an empirical expression [1-4]. Additionally, other types of problems exist as the need to perform a kinetic energy correction which must also be taken into consideration [1]. The main goal of this work was to perform the calibration of a suspended-level, or Ubbelohde, capillary viscometer, which is not a long capillary viscometer, as well as the study of corrections to be used for the measurements performed with it. The experimental work covers the calibration of that Ubbelohde capillary viscometer, the evaluation of the uncertainty of the corresponding viscometer constant and the overall uncertainty of the measurements performed with it. This study includes the evaluation of the necessary corrections for kinetic energy and surface tension effects and, finally, the analysis of the case of a set of measurements performed with n-tetradecane. The ultimate purpose of this work is to obtain the lowest uncertainty for the Ubbelohde capillary viscometer 541 01/Ia, and to understand the need for the corrections that must be considered when using capillary viscometers and how they should be applied.

2023-05-26Conference object

Open access

Solid-liquid phase equilibrium: alkane systems for low temperature energy storage

Publication . Sequeira, Maria Carolina; Nogueira, Bernardo A.; Caetano, Fernando J. P.; Diogo, Herminio; Fareleira, João M. N. A.; Fausto, Rui

The incessant and increasing need for energy requires urgent and effective solutions. The supply of renewable energies is mainly intermittent, which often leads to a gap between the availability of energy and its consumption. Therefore, energy storage becomes imperative for increasing the efficiency in the use of the produced energy. Concerning this, the use of phase change materials (PCMs) has taken a very important role, especially for active cooling systems. In particular, eutectic systems can be designed with characteristics that make them suitable for each application, allowing significant energy savings, which is very relevant in what concerns economic and environmental sustainability [1]. This work aims to the characterization of selected systems that can be used for energy storage at low temperatures, starting by the construction of solid-liquid phase diagrams using differential scanning calorimetry (DSC) and Raman Spectroscopy results. Phase diagrams are crucial to characterize the behaviour of these systems and reveals the robustness of the PCM, and for new PCMs, equilibrium studies are essential to achieve the desired melting temperature [2]. This work is focused on binary systems composed by normal alkanes, in particular, the binary mixtures C8-C10 and C10-C12. These systems revealed to behave as eutectic systems at low temperatures, showing a promising applicability for thermal energy storage for low temperature applications. The eutectic points are around -61ºC and -35ºC, respectively. Additionally, a fitting equation for the experimental liquidus lines of the phase equilibrium diagrams is proposed for each system.

2023-09-12Conference object

Open access

Adipates as new phase change material: seeking for a low temperature energy storage system

Publication . Sequeira, Maria Carolina; Nogueira, Bernardo A.; Caetano, Fernando J. P.; Diogo, Herminio; Fareleira, João M. N. A.; Fausto, Rui

The recent and endless increasing need for energy is requiring imperative and efficient solutions. Renewable energies are an effective solution, but they are also intermittent, which often leads to a gap between the availability of energy and its demand. Therefore, energy storage becomes crucial for improving the efficiency by reducing the mismatch between demand and supply thus offering better management capabilities. The use of phase change materials (PCMs) became an attractive technology, especially for active cooling systems. In particular, eutectic systems can be designed for each application, allowing significant energy savings, which is very relevant in what concerns economic and environmental sustainability [1]. Equilibrium studies and their phase diagrams are crucial to characterize the behavior of these systems, particularly for new PCMs [2]. This work aims the characterization of a selected type of binary system composed by di-n-alkyl adipates that can be used for energy storage at low temperatures, starting by the construction of solid-liquid phase diagram based on Differential Scanning Calorimetry (DSC) and Raman Spectroscopy results. The studied system is a binary mixture of diethyl and dibutyl adipates and reveals to behave as a eutectic system at low temperatures, possessing also polymorphism, therefore presenting a relatively complex phase diagram. The eutectic point was found around -33ºC and the polymorphism transition, being characteristic of the dibutyl adipate, occurs at around -36ºC for the overall phase diagram. Raman spectroscopy was fundamental concerning the construction of the phase diagram, enabling to identify the different solid and liquid phases of the system. This work provides new phase equilibrium data, which, to the knowledge of the authors, are the first in the literature, concerning these compounds. The studied binary system has promising characteristics for low temperature energy storage. It is also demonstrated how solid-liquid-phase equilibrium studies are the key to select the most appropriate phase change material for a specific thermal energy storage (TES) application.

2023-07Conference object

Open access