Repository logo
 
Publication

Density of diisodecyl phthalate at temperatures from (283.15 to 363.15) K and pressures from (0.1 to 65) MPa

dc.contributor.authorBrito e Abreu, Susana
dc.contributor.authorAvelino, Helena Maria da Nóbrega Teixeira
dc.contributor.authorCaetano, Fernando J. P.
dc.contributor.authorFareleira, João M. N. A.
dc.date.accessioned2015-01-19T13:12:49Z
dc.date.available2015-01-19T13:12:49Z
dc.date.issued2010
dc.description.abstractDiisodecyl phthalate (DIDP) has recently been proposed to be an industrial reference fluid for moderately high viscosity at atmospheric pressure. Moreover, some results of the viscosity and also of the density of DIDP at high pressures have been reported recently. The main aim of the present work is to contribute with necessary data to enable the eventual proposal of DIDP to be a reference fluid for viscosity at high pressures. In this work, we describe measurements of the density of DIDP at 12 temperatures from (283.15 to 363.15) K and at pressures from (0.1 to 65) MPa. The measurements were performed using an Anton Paar GmbH model DMA HP vibrating tube densimeter with a reading device (model DMA 5000 unit). Prior to the DIDP measurements, the apparatus was calibrated with water and toluene. The sample of DIDP was obtained from Merck KGaA, with a minimum purity of 99.8 % by gas chromatography (GC). The results of the density of DIDP were correlated by a modified Tait equation. The relative root-mean-square deviation (rmsd) of the reference data from the correlation is ( 0.005 % with practically zero bias. The effects of the viscosity of the sample on the density measurements are discussed and taken into account in the estimated combined uncertainty of the present results. However, no corrections of the present measurements have been performed. The relative uncertainty of the present measurements is estimated to be less than ( 0.3 % at a 2σ level. This estimate is partly based on the tests performed with dichloromethane at temperatures within the range (283.15 to 333.15) K and pressures from (0.1 to 65) MPa. The present results are compared with literature density data of DIDP samples with purity equal to or greater than 99.8 % (GC), performed at either atmospheric pressure or pressures higher than 0.1 MPa. The literature data sets comprise measurements performed using vibrating tube instruments and pycnometry and results calculated from speed of sound measurements. The literature data were found to be, generally, in agreement with the present results, within their nominal relative uncertainty, except for one of the vibrating tube data sets that has a maximum relative deviation (-0.4 %), which is slightly larger than its claimed relative uncertainty.por
dc.identifier.doi10.1021/je1001413
dc.identifier.issn0021-9568
dc.identifier.issn1520-5134
dc.identifier.urihttp://hdl.handle.net/10400.2/3612
dc.language.isoengpor
dc.peerreviewedyespor
dc.publisherAmerican Chemical Societypor
dc.relation.publisherversionhttp://pubs.acs.org/doi/abs/10.1021/je1001413por
dc.subjectDensitypor
dc.subjectDiisodecyl phthalatepor
dc.titleDensity of diisodecyl phthalate at temperatures from (283.15 to 363.15) K and pressures from (0.1 to 65) MPapor
dc.typejournal article
dspace.entity.typePublication
oaire.citation.endPage3531por
oaire.citation.startPage3525por
oaire.citation.titleJournal of Chemical & Engineering Datapor
oaire.citation.volume55por
person.familyNameAvelino
person.familyNameCaetano
person.familyNameFareleira
person.givenNameHelena Maria da Nóbrega Teixeira
person.givenNameFernando J. P.
person.givenNameJoão
person.identifier.ciencia-id9615-6337-5695
person.identifier.ciencia-idDE17-708E-317F
person.identifier.ciencia-id8E1B-F54C-8ABD
person.identifier.orcid0000-0001-6516-2164
person.identifier.orcid0000-0002-6821-1694
person.identifier.orcid0000-0002-8442-9386
person.identifier.ridH-8325-2012
person.identifier.scopus-author-id14919229800
person.identifier.scopus-author-id7004474824
person.identifier.scopus-author-id6603840268
rcaap.rightsrestrictedAccesspor
rcaap.typearticlepor
relation.isAuthorOfPublication8efac795-4b7e-4b96-86ca-d8c612283ab7
relation.isAuthorOfPublicationf36ab422-62f8-4432-965c-73e36b0d25a2
relation.isAuthorOfPublication22e737b9-e5ab-460d-9200-5d088c622c08
relation.isAuthorOfPublication.latestForDiscoveryf36ab422-62f8-4432-965c-73e36b0d25a2

Files

Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
Susana et al DIDP Densidade pressao JCED2010 je1001413.pdf
Size:
186.57 KB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
2.02 KB
Format:
Item-specific license agreed upon to submission
Description: